PCT chamber downsized to almost same size as household microwave oven.
Saturated Pressure Cooker Test Chamber (PCT chamber)
PC-242HS series

line up:

 ■ Features & Functions
Wide test condition setting range
The PC-242HS series PCT chambers can be used in a wide range of fields, such as: moisture resistance evaluation of new materials, performance comparison test at development, storage test of electronic parts, identification of defective lots, surface treatment evaluation tests for lead pins, materials and plated parts, accelerated deterioration test for various paint-related materials. Test conditions of 100℃ and 100% RH are also available.
Light weight and compact
Small and light desktop size is achieved, and the space factor (capacity / installation space) is the largest in its class (compared to our company's products). Power supply is a general-purpose outlet of energy saving type, it can be easily introduced regardless of the installation conditions.
Minimizes dew condensation on samples
Horizontal structure and pre-heating system allow to minimize dew condensation on samples compared to conventional saturated type. (compared to our company's products).
Equipped with programmable auto-start function as standard
A programmable auto-start function that can set the start time arbitrarily is equipped.
Convenient automatic water supply at startup
The PC-242HS-A is equipped with an initial automatic water supply system, and does not require water supply for each operation.
Door safety mechanism
The door adopts double safety structure of the interlock mechanism during operation and the burn prevention cover.
Required utilities    
Power supply: Refer to the specifications. Household outlets are not recommended.
 ■ Options
Recorder, Table, Basket, etc. 
※Ask us for more details.
 ■ Specifications
Product namePC-242HS series Saturated Pressure Cooker Test Chamber (PCT chamber)
Outside dimensionsW505 x D535 x H380 mm
Effective chamber sizeφ170 x D310 mm
Weight (Approximately)40 kg
Control methodDuty control, SSR drive
TemperatureWorking range100℃ - 134℃
Control accuracy±1.5℃(100℃ - 104℃)/ ±1.0℃(105℃ - 134℃)
HumidityWorking rangeSaturated steam(100%RH STDMODE)
TimeWorking rangeContinuous operation up to 200 hours is possible.
Setting range1 h - 255 h (1 h Increments)
Maximum working pressure0.226MPa
Exhaust mode Normal exhaust / Natural cooling
Measurement termina4 (option)
Water supply methodAutomatic water supply at start up
Lid openeing/closing methodby one touch operation
Auto-start function0 h - 255 h (1h Increments)
Pressure vessel categorySimple pressure vessel
Chamber materialStainless steel (SUS304)
Power supplyAC200V / 220V / 230V / 240V, 50Hz / 60Hz
(Please specify voltage & cycle when ordering)
Power connection
Ring terminal
Safety devicesPressure safety valve, Over-pressure prevention device, Earth leakage breaker, Low water cut off device,
Malfunction detection device of microcomputer, Mechanical lid lock, Fuse for controller,
Error display: Low water heating, Overheat, Over-pressure, Temperature sensor wire disconnection, Heater abnormality,
Door abnormality, Abnormality in water supply to the chamber
Optional safety devicesBreaker for heater, Thermal fuse
※The above outside dimensions do not include the size of protrusions.
※Humidity 100% RH is an approximate value that shows the saturated steam atmosphere in the chamber.
※Specifications and appearance are subject to change without notice due to continuous product improvement.