■ Features & Functions
Pressure control method
High temperature and high pressure sterilization is performed by gradually raising the chamber temperature and pressure. This is effective for preventing damage to aluminum packs or film packs for retort foods.
A cooling device that can prevent damage to containers
Cooling water is sprayed while pressurizing the chamber with air in order to prevent rapid pressure change due to sudden condensation of vapor in the chamber during shower cooling. The seal portion of a bottle and container is prevented from being damaged.
All stages from water supply, pressurization, sterilization (disinfection) to cooling are performed automatically.
Compact body made of stainless steel
A stainless steel body that is clean and excellent in corrosion resistance is used.
A compact size autoclave which does not take space.
Electro - mechanical lid lock system Ⅱ
The electric clamp lid is employed. Opening / locking / unlocking of the lid can be performed simply by pressing a button.
The chamber opening can be widely opened for easy loading and unloading.
Dual interlock mechanism
The lid is locked by dually detecting the chamber pressure and chamber temperature during operation.
The lock state is maintained even if an operation is manually interrupted.
Set contents can be registered for each mode.
Programmable auto-start function
An operation starts at the set time.
Sufficient treatment capacity (Loading capacity)
|Pouch volume||Pouch loading capacity
|250 ml - 300 ml
||30 P - 45 P
|400 ml - 500 ml
||15 P - 30 P
Equipped with external output terminal as standard
As a printer output connector is equipped as standard, it is easy to output data.
Installation requirements are minimal and maintenance cost is low.
It can be installed simply by providing power source and water supply / drainage. See the following installation requirements. Qualification for handling boilers or pressure vessels is unnecessary. (It is necessary for users to inspect it once a year.)
・Power supply: Ask us for details.
・Water supply facility: Water supply pressure of 0.23MPa to 0.40MPa, Flow rate of 6 L / min or more
・Drainage: Steel pipes are recommended for high temperature high pressure drainage.
※Ask us for details.